Description
One2Clean Plus Treatment plant, a smart and simple treatment plant with all the features and benefits of the One2Clean system enhanced by optional modules giving further control and cleaning efficiency.
One2Clean Plus Treatment Plant – all the features and benefits of the Graf One2Clean with optional modules including +C Carbon, +P Phosphate Reduction Module, +H Hygiene Module, +R Remote Transmission, +O Pumped Outlet, which allow customers to easily tailor this system to suit individual wastewater treatment requirements.
Graf One2Clean Plus Treatment plant
a smart and simple Wastewater Treatment plant designed to treat wastewater in three simple steps to produce clear water, available in a range of sizes from 5Pe to 18Pe
Additional Modules
One2Clean Plus +C Module
Effective wastewater treatment and cleaning requires a minimum loading (wastewater flow into the plant each day).
As such, Wastewater Treatment Systems are designed and sized to support population requirements (Pe) in accordance with British Water flows and loads guide.
Graf systems require a minimum loading of 25% loading to work efficiently, e.g 6Pe system will work efficiently with 2Pe loading.
However, in applications where the minimum 25% daily loading requirement cannot be achieved or where a property is vacant for long periods of time, the addition of the +C Carbon Dosing Module will ensure efficient wastewater treatment and cleaning.
The One2Clean Plus +C module operates by drip feeding a sugar-based solution into the system to feed micro bacteria. This is a simple process in which the solution (housed in a container in the neck of the tank) is deposited via a dosing pump into the tank in the required dose which is pre-set in the control panel based on the systems requirements.
One2Clean Plus +P Module
Excessive Phosphate levels in water can lead to an increased growth of algae and aquatic plants which can result in decreased levels of dissolved oxygen (eutrophication), which in turn can lead to the death of fish and other aquatic life.
With the addition of he +P module phosphate levels can be reduced to under 1mg/ltr
The +P module operates by drip feeding liquid PAC (polyaluminiumchloride) solution into the system. This again is a simple process in which the solution (housed in a container in the neck of the tank) is deposited via a dosing pump into the tank in the required dose which is pre-set in the control panel based on the systems requirements.
+O pumped outlet Module
Used In applications where gravity discharge is not possible, the +O pumped outlet module will pump treated wastewater to a higher level drainage field or watercourse.
The pump is connected to the control panel and is pre-set to discharge clear water at the end of each cleaning cycle.
+H Hygiene Module
+H hygiene module provides chlorine dosing for disinfection purposes, killing small pathogens which could cause disease. The dosing chamber is in the form of an additional tank to prevent the chlorine affecting the bacteria in the SBR reactor tank.
This again is a simple process in which the Chlorine solution (housed in a container in the neck of the tank) is deposited via a dosing pump into the tank in the required dose which is pre-set in the control panel based on the systems requirements.
+R Remote Transmission Module
+R remote transmission is a convenient wastewater treatment system controlled by GSM, which allows the system to be monitored remotely. Ideal for remote locations allowing low cost remote diagnosis, greater efficiency, operating reliability and optimised service intervals.
One2Clean Plus Treatment Plant System – How it works
With no mechanical or electrical parts inside the tanks, only a air diffuser and air lift operated by factory pre-set controller and blower the One2Clean Treatment Plant system treats wastewater in 3 simple steps – Aeration – Settling phase – Clear Water extraction.
Wastewater Treatment Plant Cleaning Cycle
Operating on 2 x 12 hour cleaning cycles per day, the Graf One2Clean Plus Treatment Plant system provides excellent cleaning performance and has very low power consumption.
Graf One2Clean Plus Controller
The controller and blower can be either mounted in a garage or outbuilding to a maximum distance of 20mtrs from the tank, or housed in optional external control cabinet.
Note: External cabinets are an optional extra
Cleaning performance
One2Clean Plus Treatment plant – CE certified to EN12566-3, tested at PIA institute GmbH with a certified treatment efficincy of 7mg/ltr BOD,14mg/ltr SS, 0.5mg/Ltr NH4N
One2Clean Plus Treatment Plant Summary
10 Year warranty on Tank
2 year warranty on technology
No mechanical or electrical components in tank.
Minimum power consumption
Excellent Cleaning performance 7mg/ltr BOD,14mg/ltr SS, 0.5mg/Ltr NH4N
Low maintenance costs
Simple & efficient 3 step cleaning process
Commissioning, Service and Maintenance
To validate warranty, all One2Clean Plus Treatment Plant systems must be installed and commissioned as per manufacturers instructions and logged with Graf.
Regular service and maintenance should also be carried out as per manufacturers instructions.
Prices and delivery
All prices shown are subject to vat at the current rate 20%
Prices include delivery to UK mainland only
Additional carriage charges will apply to outlying areas, Scottish highlands and islands (call us for details)
Customer responsible to arrange safe means of offload.
Additional carriage charges.
Additional carriage charges will apply to items ordered separately. i.e neck extensions, control cabinets, dome shafts
